manualshive.com logo in svg

Lowrance LMS-480, Руководство по эксплуатации, Страница: 12 / 216

Поделиться
Скачать
Lowrance LMS-480 Скачать руководство пользователя страница 12

4

LMS-480DF. It has 35

°

/12

°

 cone angles. A sin-

gle-frequency Skimmer transducer with built-
in temperature sensor is packed with the
LMS-480. It has a 20

°

 cone angle. Transducers

operate at speeds up to 70 mph (61 kts).

Transmitter:

................... 3,000 watts peak-to-peak/375 watts RMS.

Sonar sounding
depth capability:

...........

LMS-480DF:

 2,500 feet/762 meters.

LMS-480:

 1,000 feet/305 meters.

(Actual capability depends on transducer
configuration and installation, bottom com-
position and water conditions. All sonar
units typically read deeper in fresh water
than in salt water.)

Depth display:

................ Continuous display.

Graph recording:

........... More than 256 MB on one MMC (or SD) card

Audible alarms:

............. Deep/shallow/fish/zone.

Automatic ranging:

....... Yes, with instant screen updates.

Auto bottom track:

........ Yes

Zoom bottom track:

...... Yes.

Split-screen zoom:

......... Yes.

Surface water temp:

..... Yes, built into transducer.

Speed/distance log:

....... Yes, with optional speed sensor (sensor in-

cluded with LMS-480DF.)

GPS

Receiver/antenna:

............External; LGC-2000 12 parallel channel

NMEA-2000-ready GPS/WAAS re-
ceiver/antenna; DGPS beacon receiver optional.

Background map:

.......... Built-in custom, detailed Lowrance map.

Contains: enhanced detail of continental U.S.
and Hawaii. Includes more than 60,000 nav
aids and 10,000 wrecks/obstructions in
coastal and Great Lakes waters. Metro ar-
eas, selected major streets/highways and in-
terstate exit services details included.

Содержание LMS-480

























































































































































































































Отзывы:

Нет отзывов