Lowrance LMS-350A, Инструкция по установке и эксплуатации

Страница: 77 / 93

74
next page appears.
Now press the key next to the
“Increase WPT” or “Decrease
WPT” label until the desired
waypoint number appears on
the screen. Or simply enter the
waypoint number using the
numbered keys. When it does,
simply press the key next to
the “Go to Waypoint” label. The
LMS-350A begins showing
navigation data to the waypoint.
ROUTES
A route gives you the ability to navigate to several waypoints without
having to re-program the unit after arriving at each one. A route consists
of two or more waypoints. When you travel on a route, the LMS-350A first
shows navigation information to the first waypoint in the route. When you
reach the first waypoint, (signalled by the Arrival Alarm), the LMS-350A
automatically sequences to the next waypoint. Navigation information is
shown to this waypoint and the process repeats. When you reach the last
waypoint in a route, the arrival alarm sounds until you turn it off.
There are four steps required to create and follow a route. First, you must
create and name the route. Next, select the waypoints used in the route.
Then determine the starting waypoint. Next, tell the unit to follow the route.
Finally, the unit will ask you if you wish to run the route forward or
backward. After these steps are completed, the LMS-350A will start
showing navigation data to the first waypoint on the route.
CREATING A ROUTE
To create a route, first press the MENU key, then press the key next to the
"More" label. Finally, press the
key next to the "Route Plan-
ning label. Now press the key
next to the “Save/Edit Route”
label. The screen shown at
right appears.
This menu lets you select the
route number, name the route,
and choose the waypoints used
in the route. Select the route
that you wish to create by