Lowrance Link-2 страница 7 Скачать руководство пользователя

Страница: 7 / 86

Lowrance - Link-2 Installation and Operation Instructions

Safety and operational information

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

CAUTION: Changes or modifications not expressly approved by the manufacturer could

void the user’s authority to operate the equipment.

Industry Canada Statement

Under Industry Canada regulations, this radio transmitter may only operate using an

antenna of a type and maximum (or lesser) gain approved for the transmitter by Indus-

try Canada. To reduce potential radio interference to other users, the antenna type and

its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is

not more than that necessary for successful communication.

Conformément à la réglementation d’Industrie Canada, le présent émetteur radio peut

fonctionner avec une antenne d’un type et d’un gain maximal (ou inférieur) approuvé

pour l’émetteur par Industrie Canada. Dans le but de réduire les risques de brouillage

radioélectrique à l’intention des autres utilisateurs, il faut choisir le type d’antenne et

son gain de sorte que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne dé-

passepas l’intensité nécessaire à l’établissement d’une communication satisfaisante.

This radio transmitter Link-2 (IC:4697A-LINK2) has been approved by Industry Canada

to operate with the antenna types listed below with the maximum permissible gain

and required antenna impedance for each antenna type indicated. Antenna types not

included in this list, having a gain greater than the maximum gain indicated for that

type, are strictly prohibited for use with this device.

Le présent émetteur radio Link-2 (IC:4697A-LINK2) a été approuvé par Industrie Canada

pour fonctionner avec les types d’antenne énumérés ci-dessous et ayantun gain admis-

sible maximal et l’impédance requise pour chaque type d’antenne. Les types d’antenne

non inclus dans cette liste, ou dont le gain est supérieur au gain maximal indiqué, sont

strictement interdits pour l’exploitation de l’émetteur.

Antenna type: Flexible with SMA type connection supplied with the radio.

CE Compliance Statement

This product complies with CE under R&TTE directive 1999/5/EC. The relevant Declara-

tion of Conformity is available in the following website under model documentation

section: http://www.lowrance.com.

Содержание Link-2























































































Результаты поиска

Содержание Link-2

Отзывы:

Похожие инструкции для Link-2

Бренды по названию

Популярные бренды

Lowrance Link-2, Руководство пользователя

Результаты поиска

Содержание Link-2

Отзывы:

Похожие инструкции для Link-2

Бренды по названию

Популярные бренды