Lowrance Link-2 страница 11 Скачать руководство пользователя

Страница: 11 / 86

Lowrance - Link-2 Installation and Operation Instructions

2-1 Keys/Controls and functions

PWR/LOCK/EXIT PWR:

To turn the unit on and off, press and hold down PWR /

/ EXIT (red key) for more than 2 seconds and release.

LOCK:

The keylock, locks and unlocks keypad. Press PWR /

/ EXIT (red key) for 1 second and release. A key icon will

appear on screen to indicate whether keylock is on or off.

EXIT:

Also used to EXIT some menu items while in DSC mode.

Short press PWR / / EXIT (red key) for 1 second and release.

VOL

Volume Adjustment - located on the side of the radio. Press

to increase or press to decrease until a comfortable volume is

reached.

SQL

Squelch or Threshold Level - located on the central control dial.

Sets the threshold level for the minimum receiver signal. 16

steps available.

Channel select - located on the central control dial. Press to

select a higher channel or press to select a lower channel.

16/9

Priority Channel. Press to cancel all other modes (except for

when in DSC mode) and to tune into the priority channel. Press

again to return to your original channel. To make Channel 09

the default instead, hold down 16/9 until a beep sounds and 09

is displayed (US only).

Channel Select.

The current channel is shown on the screen in

BIG digits with the channel description information below the

channel number.

Press

/ to step through the available channels one at a

time, or hold down to scroll quickly through all the available

channels. See Appendix B for a listing of channel charts.

Alphanumeric Entry. This key can also be used for menu

selection and alphanumeric entry. Press

/ to scroll the

cursor up or down menu options when navigating menus.

When editing an item that contains only numbers, press -

to count through the numbers or hold down to scroll through

quickly.

To enter a character, press

to step through the alphabet or

hold down to scroll through quickly.

PTT

Push To Talk. Push to start transmitting then talk into the mic.

Содержание Link-2























































































Результаты поиска

Содержание Link-2

Отзывы:

Похожие инструкции для Link-2

Бренды по названию

Популярные бренды

Lowrance Link-2, Руководство пользователя

Результаты поиска

Содержание Link-2

Отзывы:

Похожие инструкции для Link-2

Бренды по названию

Популярные бренды