Lowrance LCX-112C, Руководство по эксплуатации

Страница: 131 / 232

121
After you have looked up an item with the Find Waypoint command,
use the
→
to make sure the
G
O
T
O
command is highlighted at the top of
the screen, then press
ENT
. The unit begins navigating to the item.
To cancel navigation, press
MENU
|
MENU
|
↓
to
C
ANCEL
N
AVIGATION
|
ENT
|
←
to
Y
ES
|
ENT
. The unit stops showing navigation information.
Creating and Saving a Trail
A trail, or plot trail, is a string of position points plotted by the unit as you
travel. It's a travel history, a record of the path you have taken. Trails are
useful for repeating a journey along the same track. They are particularly
handy when you are trying to retrace your trip and go back the way you
came. The unit is set at the factory to automatically create and record a
trail while it is turned on. The unit will continue recording the trail until
the length reaches the maximum trail point setting. Default is 2,000, but it
can record trails up to 9,999 points long. When the point limit is reached,
the unit begins recording the trail over itself.
By default, the trail flashes once a second, making it easier to see against
the background map. With the default auto setting, the unit creates a trail
by placing a dot (trail point) on the screen every time you change
directions. The methods used for creating a trail and the trail update rate
can be adjusted or even turned off. See Sec. 8 for Trail Options .
To preserve a trail from point A to point B, you must "turn off" the trail by
making it
inactive before heading to point C or even back to point A. When
the current trail is set inactive, the unit automatically creates and begins
recording a new trail.
To Save a Trail
1. Press
MENU
|
MENU
| ↓ to
M
Y
T
RAILS
|
ENT
.
Sequence for saving a trail and beginning a new one. My Trails
command (left). The Trails Menu (center). The arrow to the right of
Trail 17 indicates the trail is "active," and the check to the left
indicates the trail is visible on the map display. The third figure (right)
shows the Edit Trail menu, with the Active command selected.
2. Press
↓
to the active Trail Name |
ENT
.
3. Press
→
then
↓
to
A
CTIVE
|
ENT
. This unchecks the Active option.
Active
symbol
Visible
symbol