manualshive.com logo in svg

Lowrance GlobalMap Baja 480C, Руководство по эксплуатации, Страница: 24 / 140

Поделиться
Скачать
Lowrance GlobalMap Baja 480C Скачать руководство пользователя страница 24

18

Install the gimbal bracket. Orient the bracket so the arms slope toward

the front of your unit.

Drill a 1-inch (25.4 mm) hole in the dash for the power and antenna
cables. The best location for this hole is immediately under the gimbal
bracket location. This way, the bracket can be installed so that it covers
the hole, holds the cables in position and results in a neat installation.
Some customers, however, prefer to mount the bracket to the side of the
cable hole — it's a matter of personal preference.

Front view (left) and side view (right) showing dimensions of the

GlobalMap Baja 480c when mounted on gimbal bracket.

After drilling the hole, pass the antenna connector 

up

 through the hole

from under the dash. Pass the power cable's bare-wire end 

down

though the hole from the top.

Millimeter

[Inch]

 23.4
 [0.92]

 72.9
 [2.87]

 137.9
 [5.43]

 56.9
 [2.24]

Front

 157.9
 [6.22]

 173.9
 [6.85]

Содержание GlobalMap Baja 480C













































































































































Отзывы:

Нет отзывов