Step 14
Once all the screws are started, tighten
all (4) screws using a 5mm allen socket.
Step 13
Align the holes of the hinge and the door
and install both of the supplied bottom
screws. Leave these screws loose for
now.
Step 16
The latch should hit the striker as close
to the middle as possible. If it does skip
to Step 19. If it does NOT. you will need
to loosen the hinge screws and adjust
the door up or down and retighten the
screws.
Step 15
Open the door and then close it again.
Be sure it is latches and unlatches
properly.
