Step 6
Roll the window down 2 or 3 inches so
you will have a way to hold the door.
Then close the door.
Note: It may be a good idea to roll the
window all the way down to protect the
glass during storage.
Step 5
Disconnect the body side of the door
strap by removing the (2) phillips screws
using a #2 phillips screwdriver. Leave
the door strap attached to the door.
Step 8
Remove the bottom (2) phillips screws
using a #3 phillips screwdriver in an
impact drill.
Note: If there are spacer washers under
these hinges keep track of them and
where they were. It may be necessary
to reinstall them with the new doors.
Step 7
LOOSEN the top (2) phillips screws
using a #3 phillips screwdriver. Do not
remove these screws yet.
Note: These screws can be very hard to
remove. If you do not have an impact
drill, you could use an impact driver.
Click
to see how to use an
impact driver.
Click
to
purchase an Impact driver from LROR.
