Preparing Your Little
Baby Wrap Without A
Knot
Put the fabric through the rings to make your adjustable baby carrier.
It only takes a few seconds!
You can carry baby from birth until he starts walking, in different
positions, without having to make a knot.
You can pop baby in and out of the wrap without taking anything
apart.
This baby carrier will fit you, whether you are left-handed, right-
handed, tall, small, a man or a woman.
2.
Gather the material in your hand and
put it through the two rings, in order to
create a shoulder strap.
Pull it and adjust it against you. Make
sure the edges of the wrap are visible
and that the fabric isn’t twisted.
3.
Pull the rings apart and slip the
material through the two rings.
The tail which comes out of the rings
is a different colour from the one on
your chest.
1.
Decide on which side you want to
carry your baby.
Place the rings of the sling on the
shoulder opposite the one you want to
carry your baby on. Slip the rings into
the pad*, with the wider part pointing
towards the ground.
16
- POSITION:
Place the baby upright on your chest,
with his head at “kissing distance”.
- BREATHING:
The airways (nose, mouth) must be
clear and visible by the adult at all
times. The baby’s chin must be up.
- OBSERVATION:
Constantly monitor your child while in
the baby carrier.
Safety
(see also page 22)
- Baby must not be in a horizontal
position.
- The baby’s chin must not rest against
his chest.
- Do not carry baby too low.
- The baby must not be dressed too
warmly (in winter or summer).
- The child’s legs must not be too
straight or dangling.
He must be sitting with his thighs in the
fabric, which should form a seat for him
(see “check on position” page 19).