I n P
Input Type: Select one of the following. Refer to the Wiring section for the proper
wiring.
J - I C
Type “J” Thermocouple
C A
Type “K” Thermocouple
E -
Type “E” Thermocouple
t -
Type “T” Thermocouple
L -
Type “L” Thermocouple
n -
Type “N” Thermocouple
r - 1 3
Type “R” Thermocouple
S - 1 0
Type “S” Thermocouple
b -
Type “B” Thermocouple
C -
Type “C” Thermocouple
P 3 9 2
100 ohm Platinum (NIST 0.00392 Ω/Ω/°C)
n 1 2 0
120 ohm Nickel
P 3 8 5
100 ohm Platinum (IEC/DIN 0.00385 Ω/Ω/°C)
1 P 3 8
1000 ohm Platinum (IEC/DIN 0.00385 Ω/Ω/°C)
C u r r
DC Current Input 0.0 to 20.0 or 4.0 to 20.0 mA.
U o L t
DC Voltage Input 0.0 to 10.0 or 1.0 to 10.0 volts.
d i F F
DC Voltage Input -10 to +10 mV.
- - - -
Reserved
O S U P
Zero Suppression: Select
O n
or
O F F
. Only with Current and Voltage input types.
O F F
The input range will start at 0 (zero) Input.
O n
The input range will start at 4.00 mA or 1.00 V.
U n i t
F , C
or
n o n E
.
F
°F descriptor is On and temperature inputs will be displayed in actual
degrees Fahrenheit.
C
°C descriptor is On and temperature inputs will be displayed in actual
degrees Celsius.
n o n E
°F and °C descriptors will be Off. This is only available with Current and
Voltage Inputs.
d P t
Decimal Point Positioning: Select
0
,
0 . 0
,
0 . 0 0
,
0 . 0 0 0
, o r
. 0 0 0 0
. On
temperature type inputs a change here will alter the Process Value, SP1, SP2,
ALLo, ALHi, and InPC. For Current and Voltage Inputs all Menu Items related to
the Input will be affected.
0
No decimal Point is selected. This is available for all Input Types.
0 . 0
One decimal place is available for Type J, K, E, T, L, RTD’s, Current and
Voltage Inputs.
0 . 0 0
Two decimal places is only available for Current and Voltage Inputs.
0 . 0 0 0
Three decimal places is only available for Current and Voltage inputs.
May, 2013
Page 32 of 52
949-1194 Rev. 7
www.
GlobalTestSupply
.com
Find Quality Products Online at:
