TECHNICAL CHARACTERISTICS
Power supply (terminals 1-2)
Rated voltage Us 12 - 24V
12 - 24=
Operating voltage range 9.5 - 27V
9.5 - 35V=
Frequency 50/60Hz
Power consumption/dissipation 250mW (idle)
10W (peak)
Ambient conditions
Operating temperature -40 – 85°C
Relative humidity <85%
Connections
Type of terminal Plug-in / removable
Conductor cross section (min… max) 0.2…2.5 mm²
(24 - 12 AWG)
RS485 serial port (terminals 4-5-6)
Baud rate 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600, 115200 bps
Data 7-8 bit
Parity None, odd, even
Stop bit 1-2
Modem GSM
Frequency band Penta band GSM 850/900/1800/1900/2100MHz
Output power Class 4 (2W, 33dBm) per GSM 850/900
Class 1 (1W, 30dBm) per GSM 1800/1900
Class 3 (0.25W, 24dBm) per UMTS
Class E2 (0.5W, 27dBm) per EDGE 850/900
Class E2 (0.4W, 26dBm) per EDGE 1800/1900
Antenna
Type Surface mounting, outside installation, IP69K
Frequency AMPS 850MHz
GSM 900MHz
DCS 1800MHz
PCS 1900MHz
UMTS 2100MHz
Impedence 50Ohm
Operating temperature -40 – +85°C
Gain 0dBi
Dimensions Ø50 x 16mm
Cable 2.5m
Connector SMA
Mounting M10 through hole + adhesive gasket
Housing
Version DIN rail EN-50022
Dimensions 4 modules (72mm)
Material Polycarbonate
Degree of protection IP40 on front – IP20 terminals
Weight 200g
Certifications and compliance
Reference standards EN 60950-1:2006
FCC rules, parts 15B-22H-27-24E
I459 GB I 10 17
31100262
5
CARATTERISTICHE TECNICHE
Alimentazione (morsetti 1-2)
Tensione nominale Us 12 - 24V
12 - 24=
Limiti di funzionamento 9,5 - 27V
9,5 - 35V=
Frequenza 50/60Hz
Potenza assorbita/dissipata 250mW (a riposo)
10W (picco)
Condizioni ambientali
Temperatura d’impiego -40 – 85°C
Umidità relativa <85%
Connessioni
Tipo di morsetti Fissi
Sezione conduttori (min e max) 0,2…2,5 mm²
(24 - 12 AWG)
Porta seriale RS485 (morsetti 4-5-6)
Baud rate 300, 600, 1200, 2400, 4800, 9600, 19200, 38400,
57600, 115200 bps
Data 7-8 bit
Parity None, odd, even
Stop bit 1-2
Modem GSM
Bande di frequenza Penta band GSM 850/900/1800/1900/2100MHz
Output power Class 4 (2W, 33dBm) per GSM 850/900
Class 1 (1W, 30dBm) per GSM 1800/1900
Class 3 (0.25W, 24dBm) per UMTS
Class E2 (0.5W, 27dBm) per EDGE 850/900
Class E2 (0.4W, 26dBm) per EDGE 1800/1900
Antenna
Tipo Superficiale per esterni IP69K
Frequenza AMPS 850MHz
GSM 900MHz
DCS 1800MHz
PCS 1900MHz
UMTS 2100MHz
Impedenza 50Ohm
Temperatura di impiego -40 – +85°C
Guadagno 0dBi
Dimensioni Ø50 x 16mm
Cavo 2.5m
Connettore SMA
Montaggio M10 pa guarnizione adesiva
Contenitore
Versione DIN rail EN-50022
Dimensioni 4 modules (72mm)
Materiale Polycarbonate
Grado di protezione frontale IP40 on front – IP20 terminals
Peso 200g
Omologazioni e conformità
Conformità a norme EN 60950-1:2006
FCC rules, parts 15B-22H-27-24E
GB
I
