Doc:MSGB102A0205.doc 15/07/11 P. 4/20
Main window
The main window displays all the various measurements returned by the device, providing a complete
overview of the panel status.
All the functions are accessible from the drop-down menus and those used most frequently are also shown
on the toolbar. Some of these functions are blocked and can be accessed only after entering the user-
modifiable password (at the first setting, the default password is
LOVATO
).
The following are displayed in the main window:
•
Voltage and frequency of both Line 1 and Line 2 sources
•
Switching devices status
•
ATL supply status
•
Alarm status
Lastly, the following are indicated, from left to right, on the
status bar
close to the lower edge of the main
window:
•
Model and release of the internal firmware of the ATL connected
•
Serial communication status (ONLINE = connection active, OFFLINE = connection not active)
•
ATL operating mode
•
Any alarm conditions
•
Page refresh rate
•
Modem connection status (if used)
