2/22/17
1. To avoid electric shock, disconnect the power at source prior to installation.
2.
The installation should be performed by a qualified electrician or lighting technician.
3.
Before conducting any installation, maintenance or removal, disable all power to the luminaires and wait for the fixture to cool down.
4.
Do not touch the fixture wile it is in service.
5.
If there is any problem with the fixture, PLEASE turn off the power and DO NOT attempt to repair unless you are a qualified technician or
the customer service member.
1.
Loosen screws and remove the lens set
carefully from the backplate.
2.
Drill appropriate knockouts (B) for wiring.
The fixture supports standard 3 ¼" and
4" junction box.
3.
Attach the back plate on the wall.
Use the supplied gaskets for a weather-
tight seal.
JUNCTION BOX MOUNTING
4.
Finish wiring (BLACK for LINE, WHITE for
NEUTRAL and GREEN/YELLOW GREEN
for GROUND).
5.
Replace the lens on the hinges, make
connections and close the lens set.
Then, tighten the screws.
B
Installation Instructions
Talon LED Wall Pack
WARNINGS: IMPORTANT SAFETY INSTRUCTIONS
Louvers International 851 N. Church Court, Elmhurst, Illinois 60126 │ P: 800.543.3765 │ F: 800.568.8377 www.louversintl.com
All Specifications Subject to Change Without Notice
