DEVICE DISCOVERY
The Digifact E is by default set to obtain an IP address from the network it is connected to (DHCP), hence it
must be connected to a suitable DHCP server. To discover the device on a network, the following commands
need to be run through windows powershell to locate the device name;
dns-sd -B _simic._tcp
NOTE: Apple bonjour needs to be pre-installed on the PC where the powershell commands are being
executed.
DEVICE DISCOVERY AND DEFAULT PASSWORD CHANGE
Page 4 of 6
LOUROE ELECTRONICS 6 9 5 5 VA L J E A N AVENUE, VAN NUYS, CA 91406
TEL (818) 994-6498
FAX
994-6458
website: www.louroe.com e-mail: [email protected]
(818)
®
Digifact
_E_mic-inst_01/19
™
Once the device name has been located, the following script must be run:
dns-sd -G v4
<devicename>
.local
to locate the device IP address:
The device IP address can them be typed into an internet browser
to
access the device user interface page.
(Google Chrome is recommended)
DEFAULT PASSWORD CHANGE
On first use the default password for the device is;
username: admin
password: admin
After entering the above information, the device will request the user to change the default password
Once the default password has been changed the device prompts to re-enter the new password to login
to the device.
