6 |
P a g e
Technical Specifications
Continuous Adjustable Gain:
9 to 27dB
Continuous Adjustable Input impedance:
300 to 40 ohms
Output impedance:
1.5K ohms
Signal-to-noise ratio:
85db (ref to 0.775VRMS output)
Distortion:
0.03 % @-40db output 3rd Harmonic Dominating
AC Adaptor:
120VAC 60hz, 18VAC, 500ma Wall Cube type.
Amplification Type:
complementary bipolar transistors
I/O’s:
gold RCA jack
Dimensions:
Height 3”, Width 6.5”, Length 5.8”
Weight:
2 lb 15 ounces
Troubleshooting
There is no power switch. We suggest connecting it to a switchable power strip with all
other devices, and switch the power strip on/off. You can leave the unit on 24/7 with no
adverse effect.
Hum can occur due to a variety of reasons, most commonly:
a) Quality of cables
b) Grounding: check to see that the turntable is grounded to the Copla as shown on
the
“Installation and Rear connections” section.
c) Positioning of the unit: power amps or integrated amps should be far enough
away from the turntable tonearm, Copla or your preamp.
We are committed to providing excellent service. If you have any questions or issues,
please email us at [email protected]
