5 |
P a g e
Rear Panel Control
Balance
Some MC cartridges have a channel imbalance. If you notice a stereo imaging
imbalance between the left and right channels which is not adequately addressed with
your preamp/receiver’s balance control, then,
and only then
, use Copla’s stereo balance
trim pot on the back panel. This adjustment is accessed through the hole labeled
“Balance.” The pot is factory set vertically for equal gain in each channel. Use a small,
flat head screwdriver, “greenie” or Miniature Potentiometer-Trimmer Adjustment Tool to
balance left and right channels. This is easiest with a test record or a mono record,
listening while turning the pot.
