Louis 10028729, Инструкция по установке и эксплуатации, Страница: 24 / 100

24
atmosphere or by electrical discharges during thunderstorms. The dryer contains an ozone generator,
which creates ozone by means of powerful electrostatic discharge.
CAUTION!
Respiratory irritation!
Ozone has a familiar smell, which is often noticeable after a thunderstorm. Too
high a concentration of ozone can cause headaches or respiratory difficulties.
The dryer only generates an extremely small amount of ozone which is within the
recommended limits. Although the ozone particles decompose after a short time,
it is recommended to always use the unit in a well ventilated room.
14 | Specifications
Universal Dryer
Model: SDW 100
Input power: 220 -230 V~/50/60 Hz /max. 300 W
Operating conditions: 0°C to + 60°C
Dimensions (H x W x D): approx. 28 x 33 x 17 cm
Weight: approx. 1.5 kg
15 | Declaration of conformity
The EU Declaration of Conformity can be requested at the address given on the reverse side.
16 | Disposal
Packaging disposal
Please dispose of the packaging appropriately. Dispose of cardboard and cardboard
boxes with waste paper and dispose of plastic film with recyclables.
Universal Dryer
(Applicable in the European Union and other European countries with systems for separate collection of
recyclables)
Batteries must not be put into domestic waste!
Should the Universal Dryer no longer be able to be used, every consumer is legally
obliged to hand in old appliances separately from household waste, e. g. at a collection
point in his municipality or district. This ensures that old appliances are recycled
professionally and negative effects on the environment are avoided. For this reason,
electrical appliances are marked with the symbol shown here.
17 | Contact
If you have any questions about the product and/or these instructions, please contact our Technical
Centre by fax on 0049 (0) 40 -734 193-58 or by e-mail at: technikcenter@louis.de before you install
or use the product. We will help you as quickly as possible. This is the best way to ensure that your
product is installed properly and used correctly.
Made in China