Louet S40 LE, Инструкция по эксплуатации

Страница: 4 / 11

2
Assembly
The flyer assembly with flyer and bobbin is mounted in the box cover. It
can be taken out by lifting the metal pins one by one out of their holes.
Fixing the flyer assembly to the spinning wheel:
Place the rubber band of the flyer assembly behind the screw head (2)
on the spinning wheel. Place the pins of the flyer assembly one by one
in the black holes (6). The flyer is now pressed against the wheel.
Leading the thread:
Put a lead-thread through the metal loop (3) through the hole in the flyer
over the hooks and tie it on the loop on the bobbin.
Changing the bobbin:
Unscrew the black screw (4) and pull the flyer out of the triangular
holder. The bobbin stays behind because of the brake wire and can be
easily changed.