30
ILMYM92
* If the STOPWATCH hands do not return to the “0” position when the stopwatch is reset
to “0”, follow the procedure in “Setting the time and adjusting the stopwatch hand position”.
MOVEMENT OF THE STOPWATCH 1/20-SECOND HAND
• After the stopwatch is started, the STOPWATCH 1/20-second hand moves for about 10
minutes and automatically stops at the “0” position.
• When the measurement is stopped or split time is measured, it moves to indicate the
elapsed 1/20 seconds.
• After the stopwatch is restarted or split time is released, the STOPWATCH 1/20-second
hand moves for about 10 minutes and stops automatically.
• In the same manner, if the stopwatch is stopped and restarted repeatedly or split time is
measured and released repeatedly, the STOPWATCH 1/20-second hand moves for about
10 minutes and stops automatically.
•
BEFORE USING THE STOPWATCH, BE SURE TO CHECK THAT THE CROWN IS SET AT THE
NORMAL POSITION AND THAT THE STOPWATCH HANDS ARE RESET TO THE “0” POSITION.
31
ILMYM92
SPLIT TIME MEASUREMENT
MEASUREMENT OF TWO COMPETITORS
A
B
B
A
B
B
B
B
START
SPLIT
START
SPLIT
RELEASE
STOP
RESET
A
B
RESET
FINISH TIME
OF 1ST
COMPETITOR
2ND
COMPETITOR
FINISHES
FINISH TIME
OF 1ST
COMPETITOR
ESPAÑOL
ITALIANO
FRANÇAIS
DEUTSCH
ENGLISH
