INSTRUCTIONS FOR USE
Translation of the original instructions
23
·
Never operate the electrical plate without a pot
·
The pot must have a smooth bottom with a diameter suitable for the plate (never smaller)
4.3
Glass-ceramic cooker hob
On the front panel, a plate is indicated above the knob to which it corresponds, marked by the index
·
Turn on the switch located upstream of the appliance. Turn the control knob that corresponds to the plate
from "O" to the desired heating level, between 1 and 6
·
The indicator light turns on as soon as the appliance is powered
·
The plates are formed by a core and a ring; turning the knob as shown above turns on only the core of
the plate; turning the knob past position "6" also turns on the ring and the temperature can be adjusted
again between pos. "1" and "6"
Note
·
Each plate is connected to a power regulator, which makes it possible to select from among 6
different temperatures. Higher temperatures are recommended at the start of cooking
·
Each plate has a temperature limiter that is triggered when the temperature that was reached could
damage the glass
Warning
When the glass surface heats up, the luminous residual heat indicator turns on that
corresponds to the plate in use. This indicator remains on as long as the glass is hot, even if
the plate is off, to prevent the risk of burns
