F I R S T- S e r i e s
©
Copyright LOTRONIC 2018
Page 6
A M P L I F I E R I N P U T C O N F I G U R AT I O N
6. POWER
LED signal to indicate the switching on of the system.
7. FRONT LED
Turn on/off front logo LED.
8. POWER SWITCH
This power switch turns on the system. Remember to adjust the volume level to the lowest setting before turn on the power
switch.
9. AC INPUT CONNECTOR
Connect the included power cord to the AC input connector before push on the power switch.
10. Fuse
Only replace the fuse when the device is disconnected from mains. Only use fuses of the same rating and power. The correct
fuse value is specified on the rear panel.
11. LCD
DSP control and monitoring interface.
12. MASTER VOLUME
Adjusts the sound level.
DSP: Scroll through the menu and select the available choices. Push the MASTER VOL knob to enter the DSP menu.
13. SPEAKER MODE:
PA:
This is the default setting for the loudspeakers. Use this setting when your loudspeaker is being used either on a speaker
stand and facing towards your audience.
DJ:
Use this setting when your loudspeaker is being used for DJ only or play DJ music application and is facing towards
the audience.
Monitor:
Use this setting when your loudspeaker is being used as a stage monitor facing towards you.
Speech:
Use this setting when your loudspeaker is being used for Speech only or Spoken Word only applications and is facing
towards the audience.
14. BLUETOOTH:
To pair the speaker with your Bluetooth device:
A:
With the loudspeaker powered on, press the pair button for two seconds, the Bluetooth on. The paired LED will flash.
B:
On your Bluetooth device's settings page, enable Bluetooth and select BST-FIRST as the device. When paired
successfully, the paired LED is light steadily.
C:
Turn your Bluetooth device's volume to its lowest setting.
D:
On your Bluetooth device, play music. Then we recommend setting the Bluetooth device's volume at its maximum.
E:
Once your device's is paired with the speaker, the speaker will remember the device. To reconnect it, go to your device's
Bluetooth settings page and select “Connect" to re-establish the connection.
F:
When the device's connected Bluetooth is playing, press the Pair button for fast play and pause operation, when you
press the pair button for 2 seconds, the device is disconnected, and the Bluetooth power off.
15. BLUETOOTH VOLUME
Turn this knob to adjust the input volume of you paired Bluetooth device.
16. MIX OUT SELECTOR
When
disengaged (Ch1), the MIX OUT level will be unaffected by the I
NPUT VOLUME controls.
When engaged (MIX), the MIX OUT level can be adjusted by the INPUT VOLUME controls.
