17
OPERATION
PLEASE READ AND UNDERSTAND THIS ENTIRE SECITON BEFORE
OPERATING YOUR MACHINE. ONLY QUILIFIED PERSONNEL SHOULD
OPERATE THIS EQUIPMENT. OBSERVE ALL SAFETY INFORMATION
THROUGHOUT THIS MANUAL.
v
WELDING OPERATIONS
Ø
WELDING STEPS
1.
Plug in the MIG175 Welding Machine.
2.
Straighten out the welding torch.
3.
Turn ON the unit and depress the gun trigger. Feed wire and cut 1⁄4” from the end of the
nozzle.
4.
Place the ground clamp as close to the welding zone as possible and remove any paint corrosion,
grease and oils before welding.
ELECTRIC SHOCK
can be fatal
w
Have an electrician install and service this equipment.
w
Turn the input power off at the fuse box, disconnect or unplug supply lines and allow
machine to sit for five minutes minimum to allow the power capacitors to discharge
before working inside this equipment.
w
Do not touch electrically hot parts. Turn the input power OFF and unplug the machine
from the receptacle before working on this equipment.
FUMES AND GASES can be dangerous
w
Keep your head out of fumes.
w
Use ventilation or exhaust to remove fumes from breathing zone.
WELDING SPARKS can cause fires or explosions
w
Keep flammable material away.
w
Do not weld, cut or gouge on containers that have held combustibles.
ARC RAYS can burn
w
Wear eye, ear and body protection.
Содержание MIG175
Страница 1: ...1 LOTOS MIG175 MIG Welder ...
Страница 20: ...20 Ø WELDING LABEL ...