Door/Window Detector (for DC 12V battery)
20
Change the Battery
When the sensor sends a low battery message to the main console, remove the old
battery and replace it with a fresh alkaline battery. The low battery message on the LCD
is shown below
Button function
1. Magnet.
2. Transmit LED : When the
sensor is activated, the LED
will light for 1 sec.
3. Magnet sensor
4. Battery Cover : Remove the
cover and install one 12V
alkaline battery here.
Note:
The magnet and magnet
sensor must be placed in
parallel position (triangle arrow)
to ensure a better setting.
63 WINDOW SENSOR
01 Low battery
Zone address setting
You can set the sensor as “ Door “ or “ Window “ detector by using the jumper selector. If
you want to set the sensor as a Door sensor, put the Jumper on the “D” side. (If the set
Jumper is on the “W” side, the sensor becomes a Window sensor).
Notes on the Door/Window Detector
DOOR / WINDOW
SELECT
DOOR
DOOR / WINDOW
SELECT
JUMPER
TYPE SEL
WINDOW
W
JUMP
TYPE S
E
DC 12V
DC 9V
