7
ENGLISH
Optional - Wall Mounting the Camera
Tap anchors into holes with a hammer. Insert
screws 2/3 of the way.
Before mounting the camera:
• Determine where you will get the best view of your child.
• Ensure the power cable is long enough to power the
camera.
1
Drill two holes 44mm from one another.
2
3
Align the mounting points on the bottom of
the camera with the screws and push the
camera down.
Make sure all power cables are at least
3ft / 1m away from the crib and out of
reach of your child.
Use the included cable clip to help keep
power cables away from your child.
Cable clip should be used even if you
are not mounting the camera.
To mount the camera:
To install the cable clips:
Place the camera in the desired position.
Feed the power cable through the two plastic
brackets on each cable clip. Wrap the cable
around the brackets to shorten the cable.
1
2
3
Position the cable clips against a wall or floor.
Mark your chosen position and remove the
power cable from the two brackets.
Remove adhesive guard when you are
prepared to attach the clips.
4
Once the cable clips have been attached, feed
the power cable through the two brackets and
wrap excess cable around the brackets.
44mm
Mounting
points