8
CHANNEL SETUP MENU
From the Main Menu, press the
button to enter the Channel Setup menu,
shown to the right.
Below is a description of each
Channel Setup option:
Title
– Assign a 6 character title for each
camera location. By default, titles are
numbered from 01-16.
Dwell
– Activate / deactivate by channel
which cameras will be seen in Sequencing
mode. Refer to page 10 for more details
on Sequencing.
Brightness / Contrast / Color
– Adjust
the picture’s Brightness / Contrast / Color
on a scale between 0~9.
Alarm
– Select the Alarm Polarity for each
PIR motion sensor from LOW, HIGH, or
OFF. LOW is the equivalent of Normally Open. HIGH is the equivalent of Normally Closed.
OFF disables the PIR Alarm feature. The setting is defaulted to LOW for each channel.
Record
– Select how the connected VCR / DVR will record during an alarm. The EVENT option will record
for more time on the channel in which the alarm was triggered. For example, if an alarm is triggered on
Channel 1, Event recording will follow this channel sequence: 1-2-1-3-1-4-1-5-….-16, whereas the standard
recording sequence is 1-2-3-4-5-6…-16.
Selecting the NORMAL record method will simply record normally as set up. If the Record option is set to
OFF, an alarm trigger will not cause the VCR / DVR to start recording.
01
ON
05
05
05
LOW
EVENT
02
ON
05
05
05
LOW
EVENT
03
ON
05
05
05
LOW
EVENT
04
ON
05
05
05
LOW
EVENT
05
ON
05
05
05
LOW
EVENT
06
ON
05
05
05
LOW
EVENT
07
ON
05
05
05
LOW
EVENT
08
ON
05
05
05
LOW
EVENT
09
ON
05
05
05
LOW
EVENT
10
ON
05
05
05
LOW
EVENT
11
ON
05
05
05
LOW
EVENT
12
ON
05
05
05
LOW
EVENT
13
ON
05
05
05
LOW
EVENT
14
ON
05
05
05
LOW
EVENT
15
ON
05
05
05
LOW
EVENT
16
ON
05
05
05
LOW
EVENT
TITLE
DWELL
ALARM
RECORD
NOTE
: Leave the Alarm Polarity at LOW or OFF for channels with no PIR Sensor connected.
Otherwise, you will experience a continuous alarm.
