tighten
swivel
Features:
•
B&W Indoor/ Outdoor* Motion Sensor Camera
•
¼” B/W CMOS Image Sensor
•
Two
way
audio
•
Compatible with all Lorex, Sylvania and Sentinel
CCTV B&W Observation Systems
•
3.6 mm wide angle lens
55 ft extension cable
B&W PIR Motion Sensor
Camera Mounting Bracket
SG7210S Camera with 6’ cable and
mounting bracket
a. Attach the camera to the mounting stand and
tighten the swivel.
* This camera is not designed for direct exposure to water, rain or
snow
b. Connect the supplied cable to the back of the
camera
1. Confirm Package Contents
2. Mount and Install the Camera
3. Connect the Camera to the Monitor
a. Connect the other end of the cable to the back
of the observation system monitor.
Keep the camera installed away from sunlight.
Also avoid places where humidity is high or unable to
protect against rain. The mounting bracket must be
attached to a structural device, such as a wall or ceiling
rafter using a suitable fastener.
4. Troubleshooting
PROBLEM
REMEDY
No Picture
Check the connection
Picture Flickering
Make sure the camera is not
facing any direct light or
sunlight
Motion Sensor is not
working.
Check the connections from
the PIR to the camera
c. Locate a wall stud or ceiling joist and secure
the stand using the supplied screws.
