CAMERA INSTALLATION
1. Attach the stand base to the wall or ceiling where you want to install the
camera. Locate a wall stud or ceiling, and secure the bracket using the
four supplied screws.
2. Attach the camera to the stand and firmly tighten the swivel.
3. Attach the camera with the stand to the stand base, and firmly tighten the
joint knob on the stand base.
4. Connect the supplied 9V 500mA DC adapter to the DC IN jack at the rear
of the camera, and plug it into the electrical outlet.
MONITOR INSTALLATION
DC INPUT Jack
13.8V 1.0 A
AC Adapter
1. Connect the supplied AC adapter to the DC INPUT JACK at the rear of
the receiver monitor and plug it into the 120V electrical outlet.
Ensure the power switch on the monitor and camera are set to
the OFF position before proceeding with the following steps.
NOTE
5
To Power
Adapter
