26
Alarm Set
Alarm Set
1.
ALARM
- Configures the
ALARM
type for an alarm
event. Navigate by pressing the
K
and
L
buttons
to highlight, and press the
OK
button to switch
between
ALARM
modes:
•
OFF
- No display
•
OSD
(On Screen Display) - Visual alert only
[AL]
•
OSD + BUZZER
- Both Visual and Audible alerts
2.
CH1 - CH8
- Set the alarm mode for cameras 1
through 8.
• Change the Alarm Interval - Navigate by
pressing the
K
and
L
buttons to highlight the
number of seconds, and press the
OK
button
to select. Use the
K
and
L
buttons to change
the number of seconds for alarm display, and
press the
OK
button to accept the change.
• Press the
I
and
J
buttons to highlight the alarm
type
OK
button to change between alarm
modes. Alarm Modes include
OFF
(no alarm),
N/O
(Normally Open) and
N/C
(Normally
Closed). Press
OK
to accept the change.
NOTE: This N/O N/C Setting is for the external
alarm input terminal ONLY.
3.
RETURN
- Return to the
MAIN MENU
. Navigate
by pressing the
K
and
L
buttons to highlight, and
press the
OK
button to select
4.
EXIT
- Return to the camera view. Navigate by
pressing the
K
and
L
buttons to highlight, and
press the
OK
button to select
[ALARM SET]
ALARM
CH1
CH2
CH3
CH4
CH5
CH6
CH7
CH8
RETURN
EXIT
:
:
:
:
:
:
:
:
:
:
:
[OFF]
10 SEC
10 SEC
10 SEC
10 SEC
10 SEC
10 SEC
10 SEC
10 SEC
[
]
[
]
This submenu allows you to configure the
ALARM
alert type and duration.This alarm type is used
in conjunction with
PIR
cameras offered by
LOREX
, but not included with this system. Alternative-
ly, you may use an External motion sensor that connects to the monitors’
ALARM BLOCK.
Refer
to Appendix #6 (Connecting a Motion / Alarm Device) on Page 45.
[N/O]
[N/O]
[N/O]
[N/O]
[N/O]
[N/O]
[N/O]
[N/O]
