Lorex LHWF1006 Series, Инструкция по эксплуатации, Страница: 28 / 96

Recording 7
By default, the system is set to record motion events from all connected cameras. It is recom-
mended that you use the Lorex Cirrus app to optimize camera motion detection regions so that on-
ly objects of interest will trigger recording (see 4.4.3
Optimizing Motion Detection , page 13 for
details). You can also record video from your cameras manually using the recorder interface or the
Lorex Cirrus app.
When a camera is recording video, the type of recording is shown with an icon in the bottom-left
corner of the camera image.
You may see one of the following icons:
•
Motion Recording:
The system has detected motion and is recording the event.
• Continuous / Manual Recording: One of 2 actions may be occurring:
1. Manual recording has been enabled and the system is currently recording video.
2. Certain wire-free systems have an option for continuous recording. In order to take advant-
age of continuous recording:
◦ Your recorder must have a hard drive installed – recorders that use microSD card stor-
age do not support continuous recording.
◦ Connect any cameras you want to record continuously to a power outlet using a USB
power adapter.
◦ Change the camera’s recording time to Continuous (see 7.1 Recording Time for Motion
Detection , page 20) and set a continuous recording schedule (see 7.4 Setting a Record-
ing Schedule , page 23).
7.1 Recording Time for Motion Detection
When a wire-free camera detects motion, the camera will stream live video and record for a set pe-
riod of time before returning to standby mode. You can choose how long each camera records for
when motion is detected.
To configure recording time:
#LX400109; r. 5.0/56381/56402; en-US 20