Lorenz Messtechnik GmbH
Obere Schlossstrasse 127/129/131
73553 Alfdorf
Phone +49 7172 93730-0, Fax +49 7172 93730-22
Technical changes, errors and misprints excepted.
090370h_SI-USB3
7/14
Warning
: Please pay attention to the signal type of the sensor when connecting the sensor.
Connecting the sensor with the wrong signal type can damage the amplifier and the sensor.
The Lorenz USB drivers are required for the operation on a PC. They are available for download on
our website. Guidance is available in document no. 090235.
For the operation of the SI-USB3 we recommend the software VS3. It is available for download on our
website. Guidance is available in document no 090367.
Among others, this software provides following functions:
•
Configuration possibilities for the VS3
•
Storage of sensor-related scaling and adjustment data
•
Display for the presentation of measured data
(actual value, tare value, minimum value and maximum value)
•
Presentation of the measured data in a diagram
•
Storage of measured data in CSV-format (output configurable)
•
Storage of the diagram in BMP-format (output size adjustable)
•
Print-out of the diagram with date and definable superscription
•
Presentation of the sensor information
The communication protocol is available for the development of your own applications. The English
protocol description is available in document no. 90110 on our website.
4.2 Safe and correct Use
Warning
: Observe the correct sensor adjustment.
Consider the correct VS3 configuration.
Choose a significant file identification/prefix when storing measured data.
Fasten housing, ground, connect power supply, protect from splash water and do not pull
the cable.
