v140822
Sun. Water.
Life.
BERNT LORENTZ GmbH & Co. KG
Kroegerskoppel 7, 24558 Henstedt-Ulzburg, Germany, Tel. +49 (0) 4193 7548 - 0, Fax - 29,
www.lorentz.de
All specifi cations and information are given with good intent, errors are possible and products may be subject to change without notice. Pictures may
differ from actual products depending on local market requirements and regulations.
12
Operation Data displayed
Display (e g )
initial status: current running data
MODE
output frequency of controller
= 50.00 Hz
MODE
input voltage of controller
= 340 V
MODE
input current of controller
= 5.00 A
MODE
input power of controller
= 1.50 kW
MODE
output current of controller
= 6.0 A
MODE
time
= 12.30 h
MODE
syncronous rotation speed
= 500 min
-1
MODE
controller temperature
= 37° C
MODE
water level sensor status
= normal water level
4 2 Controller Setup and Operation
4 2 1 Instructions for Display Status
There are three kinds of status for operating panel display:
1) running data display, 2) control parameter display, 3)
historical data display. The default status is the display of
running data. Press the
[PROG]
key to enter the status of
control parameter display, and press the key again to return
to the default status. Press
[DATA]
key to enter the status
of historical data display, and press the
[DATA]
key again
to return to the default status.
Figure 9: Diagram for display status switching
4 2 2 View Running Data