11
INSTALLATION
INSTALLATION
Installation
Installation area
Warning!
y
Stability is important to prevent the product from
wandering!
y
Make sure that the product should not stand on the power cord .
Before installing the machine, the location characterized as follows
shall be selected:
1 . Rigid, dry, and level surface
2 . Avoid direct sunlight
3 . Sufficient ventilation
4 . Room temperature is above 0 °C
5 . Keep far away from the heat resources such as coal or gas .
Unpacking the washing machine
Warning!
y
Packaging material (e .g . Films, Styrofoam) can be
dangerous for children .
y
There is a risk of suffocation! Keep all packaging well away
from children .
1 . Remove the cardboard box and styrofoam packing .
2 . Lift the washing machine and remove the base packing .Make sure the small triangle
foam is removed with the bottom one together . If not, lay the unit down with side
surface, then remove the small foam from the unit bottom manually .
3 . Remove the tape securing the power supply cord and drain hose .
4 . Remove the inlet hose from the drum .
Remove transport bolts
Warning!
y
You must remove the transport bolts from the backside before using the product .
y
You’ll need the transport bolts again if you move the product, so make sure you
keep them in a safe place .
1 . Please take the following steps to remove the bolts:
2 . Loosen 4 bolts with spanner and then remove them .
3 . Stop the holes with transport hole plugs .
4 . Keep the transport bolts properly for future use .
