LORD 6253-4220 Скачать руководство пользователя страница 10

Страница: 10 / 75

3DM

-GX5-25

User Manual

Basic Setup and Operations

Do not put the 3DM- GX5- 25 in contact with, or in close proximity to,

magnets. Magnets may disrupt operation and cause magnetization of internal components, which can affect

magnetometer performance. If magnetization is suspected, use a degaussing tool to demagnetize.

To acquire sensor measurements and computed outputs, the 3DM-GX5-25 uses a host computer,an

RS232 or USB communications port, and applicable software. The LORD Sensing MIP Monitor software

is provided with the system and includes all functions needed for sensor configuration and data

acquisition. Users may also utilize the LORD Sensing MIP Data Communications Protocol (DCP) to write

custom software applications with expanded or specific feature sets needed for the application.

MIP Monitor includes a message building tool that can be used to streamline this process. For more

information,

see OEM System Integration on page 47

In this section, hardware and software setup is described, including an overview of the MIP Monitor

software menus required to configure a sensor and begin data acquisition. This is not a complete

demonstration of all system or software features and capabilities.

Figure 3 -Viewing Sensor Data with MIP Monitor

Содержание 6253-4220












































































Результаты поиска

Содержание 6253-4220

Отзывы:

Бренды по названию

Популярные бренды

LORD 6253-4220, Руководство пользователя

Результаты поиска

Содержание 6253-4220

Отзывы:

Бренды по названию

Популярные бренды