40
G-Link-200-OEM
USER MANUAL
9.2 Operating Specifications
Specifications
Analog Input Channels
Measurement range
8 g
40 g
±2
g
, ±4
g
, or ±8
g
configurable
±10
g
, ±20
g
, or ±40
g
configurable
Noise density
25 µ
g
/√ Hz
80 µ
g
/√ Hz
0
g
offset
±25 mg (±2
g
)
±50 mg (±10
g
)
0
g
offset vs temperature
±.1 mg/ °C (typical)
±.15 mg/ °C (max)
±0.5 mg/ °C (typical)
±0.75 mg/ °C (max)
Integrated Sensors
Triaxial MEMS accelerometer, 3 channels
Accelerometer bandwidth
DC to 1 kHz
Resolution
20 bit
Scale factor error
< 1%
Cross axis sensitivity
1% typical
Sensitivity change (temperature)
±0.01%/°C typical
Anti-aliasing filter
1.5 kHz (-6 dB attenuation)
Low-pass digital filter
26 to 800 Hz - configurable
High-pass digital filter
Off to 2.5 Hz - configurable
Integrated Temperature Channel
Measurement range
- 40°C to 85°C
Accuracy
±0.25°C (over full range)
Sampling
Sampling modes
Continuous, periodic burst, event triggered
Output options
Acceleration, Tilt, and Derived channels:
Velocity (IPSrms), Amplitude
(Grms and Gpk-pk) and Crest Factor
Sampling rates
1 Sample/hour to 4096 Hz.
Sample rate stability
±5 ppm
Network capacity
Up to 128 nodes per RF channel (bandwidth calculator)
http://www.microstrain.com/configure-your-system
Node synchronization
±50 µsec
Data storage capacity
16 M Bytes (up to 8,000,000 data points)
Operating Parameters
Wireless communication range
Outdoor/line-of-sight: 2 km (ideal)*,
800 m (typical)**
Onboard antenna: 1 km (ideal)*, 400 (typical)**
Indoor/obstructions: 50 m (typical)**
Antenna
Surface mount or External through MMCX or U.FL connector
Radio frequency (RF)
transceiver carrier
License-free 2.405 to 2.480 GHz with 16 channels