7
NOTE – AD (AUDIO DESCRIPTION)
Audio description is an optional additional narrative of on-screen visuals, usually inserted between dialogue. When AD is
available you will hear normal audio plus the descriptions. When AD is not available you will hear normal audio. AD is
available on TV One and TV Two. This feature is designed to assist vision impaired people and is a service offered by
some broadcasters.
SET UP AND BASIC OPERATION GUIDE
Default Password
At certain times in the operation you may be asked for a password to gain access to a menu function. The default
password is 0-0-0-0
Remote Control
Battery Installation – Fit the two batteries supplied to the remote control following the polarity directions located inside the
battery compartment.
Battery Safety
Do not mix old and new batteries. Always replace both batteries if changing. Use only Alkaline (recommended) and always
use batteries of the same type and make. Dispose of any batteries as per the manufacturers instructions. Do not
incinerate.
Initial Set Up Installation
Step 1
v
Connect the set-top box as per the options shown under CONNECTION GUIDE.
v
Using the SOURCE button on your existing TV select HDMI or AV depending on your connections from the
Set-Top Box to your TV. This will be the SOURCE channel for the Set Top Box viewing.
Step 2
v
Switch the power on to the set-top box and press the STANDBY ON/OFF button on the set-top box remote
control. A GREEN LED will be displayed indicating the unit is ON. The display on your TV should now show the
signal from the set-top box.
Step 3
v
On initial installation an
initial installation menu
will be displayed (refer picture). This menu will be displayed
only once and is not generally the menu used post first up settings.
v
This menu displays the required initial settings (OSD Language, Country, Time Zone, Active Antenna, LCN and
Start Search functions).
v
The settings are set at factory for NZ other than the START SEARCH settings.
v
Using the UP/DOWN/LEFT/RIGHT buttons navigate around the MENU to the
START SEARCH
setting and
press OK.
v
An automatic search and store will commence for all available programs in your area.
v
Press
EXIT
to exit the menu. You are now ready to watch FREEVIEW
