1. Unscrew the device: remove 4 screws from the enclosure.
Gently disassemble the device so as not to bend the flood probes.
1
Quick Installation Guide
4. The device is on. Screw it back together.
4
Version 2 - November 2021
H2O
5. Statuses, colours and behaviour of the diode (if the device is properly
connected):
Device is working correctly (power and memory) - single GREEN flash
Device is working incorrectly (power and memory) - single RED flash
Connecting to LoRaWAN - flashing BLUE
LoRaWAN frame sent - single WHITE flash
Confirmation from server after receiving the frame - single WHITE flash
Frame failed to confirm within specified timeout - single RED flash
LoRaWAN Disconnected - flashing BLUE
Connecting to BLE - flashing BLUE
RGBW diode
(glow)
