Loos & Co Locoloc SL-7NDK-SB, Руководство оператора, Страница: 6 / 12

www.LoosSeismicBracing.com Toll Free: 800-321-LOOS (5667)
OPERATING INSTRUCTIONS
1/4 3/16
1/8
3/32
INSERT DIE SET
Activate the retract trigger (4) to open jaws of tool.
Select proper die to be used and slide both pieces of the die set into jaws of the
tool by unscrewing the insert screw (5) on slide of jaw, then slide die into place
and retighten.
Place the cable sleeve to be crimped between the 2 dies. Press on the
forward trigger to crimp the sleeve onto the cable. An audible click advises
when the swage (crimp) is completed.
Open the jaws of the tool by pressing the retract trigger (4) you may now
crimp another sleeve or you may start another crimp cycle of the tool (for
the larger #GR6 and #BL8 sleeves).
#BL8 #GR6
#OR4
#G03
5
IMPORTANT
:
Die needs to fit all
the way in, otherwise it will break
the aligning ears on corners.
Insert Screw
(5)