Loos & Co Locoloc HC-3010-R, Руководство оператора

Страница: 4 / 16

www.loosnaples.com Toll Free: 800-321-LOOS (5667)
OPERATING INSTRUCTIONS
1. Insert the plug end into 120V power source. The LED indicator will be
steady green indicating the charger is now in “stand-by” mode and
ready to charge the battery. Do not plug the charger into a gener-
ator as this will likely cause the fuse in the charger to short, and
will not operate.
2. To charge a drained battery, insert the battery into the charger until the
LED indicator shows a steady amber.
This indicates the battery is being
charged and will be completed in ap-
proximately 50-70 minutes. The LED
indicator will show a flashing green
(90%) - Steady Green (100%).
3. If the indicator shows a flashing am -
ber LED light when the battery is inserted, the battery is too hot to be
charged and must be cooled to room temperature before charging.
Do not leave the battery in the charger to cool as the charger will not
recognize the battery is inserted and will not charge.
4. If the LED indicator goes out or is flashing quick amber, this could be
a possible short in the battery circuit, or a problem with the charger
itself. It is best to consult the factory for service if such a condition
occurs.
CHARGING THE BATTERY
3
1. While pressing the latch, pull out the battery
cartridge. To replace the battery cartridge,
push the new cartridge firmly into place.
2. After inserting a battery cartridge, check that
it is securely in place by pulling gently. Do not
press the latch when pulling the cartridge.
1. The ram advances when the trigger is pressed and stops when the
trigger is released.
2. To retract the ram, push the release button. The ram continues to re-
tract while the release button is pressed.
ATTACHING THE BATTERY CARTRIDGE
TRIGGER AND RELEASE BUTTON