Manual by: Rafał Smoleń
Table Of Contents
1.
Introduction
2.
Installation
3.
Signal Path
4.
Controls - Front Panel
5.
Getting Started
Introduction
Thank you for choosing Looptrotter EMPEROR Limiter 500. This single
channel single band dynamics processor is in fact a three-in-one device.
The compressor, limiter or saturator depending on how you use it - has
been designed to add colour and liveliness to your audio tracks. Thanks
to separate WET and DRY knobs, it is up to you whether you add a little bit
of EMPEROR's 500 „touch” to your audio, or run your signals 100% through
it's processing path.
Please be aware that this is not a colourless, transparent device.
EMPEROR 500 uniquely enhances apparent loudness, warmth and presence,
depending on how much INPUT you use to feed the Processor. EMPEROR 500 is
a creative device putting the wide spectrum of sonic possibilities.
Installation
Looptrotter Emperor 500 is dedicated to be installed in lunchbox 500 type
casings. In order to use it the casing like this in rack 500 format is
required. The casing is fitted with power supply and input and output
ports.
For proper intallation slide the EMPEROR 500 precisely into the socket in
rack 500 casing and tighten the securing screws.
LOOPTROTTER
AUDIO ENGINEERING
Contact:
www.looptrotter.com.pl
[email protected]
Distribution:
www.mjadiolab.pl
