11.
At the end of the record, move the lift lever towards the back to raise the tone arm and
move it back to the tone arm park, and then move the lift lever towards the front to lower
the arm onto its rest.
12.
Alternatively, lift the tone arm off the record and return it to the arm rest manually.
13.
When you have finished playing records, engage the tone arm lock to protect it from
accidental movement. Turn the volume knob in a counterclockwise direction to switch
the unit off. Unplug it from the power supply if you are not going to use it for a while.
NOTE:
Should your record stop before the last track finishes, set the auto stop control to
OFF. Your record will now play to the end, but you will have to stop the turntable
rotation manually. (Return the tone arm to its rest manually and if the turntable is
still rotating, switch off the unit by the volume control knob. Then set the auto stop
control back to ON.)
Phono encoding
1.
Set the function button to PHONO mode and then insert a memory device (USB drive,
SD or MMC card).
2.
Put your record onto the turntable and get it ready for playback.
3.
Press the record
REC button. It will take about 3 - 4 seconds to read the
memory device, then the USB or SD icon will be flashing on the LC display.
4.
Press the skip up
or skip down
button to select the desired mode (USB
or SD) for encoding, then press the record
REC button again to confirm.
(You can skip this step if only a USB drive or an SD/MMC card is inserted.)
5.
The system will start the encoding mode after a few seconds.
6.
Lower the tone arm to start playback of the record. During encoding, the USB or SD
icon will be flashing on the display.
7.
To finish encoding, press the stop
button. The display will show “END” and return to
PHONO mode.
NOTE
:
The recording speed is 1:1. Recording will take as long as playing the record.
The recording format is preset at MP3 bit rate 128 kbps.
8
