Chapter 6 Appendix A
6-17
3.
Plug- the CPU module into the Loop-V 4100 unit, then the Loop-V 4100 will reset.
4.
Press “L” from the Controller Menu screen to transfer files, as shown.
V 4 1 0 0 = = = F i l e T r a n s f e r = = = 1 7 : 1 9 : 4 6 0 7 / 1 9 / 2 0 0 0
A - > D o w n l o a d M a i n b o a r d F i r m w a r e
B - > U p l o a d M a i n b o a r d F i r m w a r e
C - > D o w n l o a d C o n f i g u r a t i o n
D - > U p l o a d C o n f i g u r a t i o n
R - > C o p y F i r m w a r e t o R e d u n d a n t
< < P r e s s E S C k e y t o r e t u r n t o M a i n M e n u o r e n t e r a c o m m a n d > >
Press “A” from the above menu, the screen of Downolad Firmware will show as below.
V 4 1 0 0 = = = D o w n l o a d F i r m w a r e = = = 2 1 : 5 7 : 5 5 0 1 / 1 8 / 2 0 0 1
A R R O W K E Y S : C U R S O R M O V E , P l e a s e I n p u t : n n n . n n n . n n n . n n n , B A C K S P A C E t o e d i t
F i r m w a r e 1 V e r s i o n : V 1 . 0 4 0 4 / 1 4 / 2 0 0 3
F i r m w a r e 2 V e r s i o n : S 1 . B 4 0 4 / 0 2 / 2 0 0 3
C u r r e n t F i r m w a r e B a n k : 1
N e x t B o o t F i r m w a r e : 1
T F T P S e r v e r I P : 1 9 2 . 1 6 8 . 1 0 0 . 2 0 6
F i r m w a r e F i l e N a m e : v 1 0 4 . r u n
<< Press ESC key to abort, ENTER key to continue >>
5.
Pull out the CPU module from the Loop-V 4100 unit..
6.
Open the jumper 11 (JP11).
NOTE: If the jumper JUM11 is kept ON, and is not
removed according to the procedure, the CPU board will switch back and forth
between versions at each reset.
7.
Plug- the CPU module into the Loop-V 4100 unit, then the Loop-V 4100 will reset.
NOT E:
When the previous version of firmware (in BANK 1) is download successfully, the
jumper 11 needs to be opened. Without this step, the firmware will be switched from BANK 1
to BANK2 when the unit is reset next time.