11
EN
1 / Grease the upper seating of your frame and
place the upper 1 1/8" bearing on this seat.
2 / Grease the lower seating of your frame and fork,
place the lower 1 1/4" bearing in the frame taking
care to place the outer chamfer towards the inside of
the head tube then insert your fork into your frame.
3 / Slide the compression ring on the fork up to the
upper bearing.
4 / Slide on the stem.
6 / Position the upper conical washer and then the
compression kit.
7 / Tightening of the compression kit in the fork's
pivot (6 Nm max) then adjust the headset.
Headset
The LOOK 765 headset is a traditional play take-up system with a compression kit. It is always best to place
the upper conical washer over the stem to avoid clamping the stem at the end of the pivot. This is in order
to reduce the long term risk of the carbon structure cracking.
[ 1 ]
Compression kit
[ 2 ]
Upper conical washer
[ 3 ]
Traditional stem
[ 4 ]
JDD Spacer
[ 5 ]
Compression split ring
[ 6 ]
Upper 1 1/8" bearing
[ 7 ]
Frame with carbon seating
[ 8 ]
Lower 1 1/4" bearing
[ 9 ]
Monobloc fork
[ 1 ]
[ 2 ]
[ 4 ]
[ 6 ]
[ 8 ]
[ 9 ]
[ 3 ]
[ 5 ]
[ 7 ]
