Longvast GVP-201, Руководство пользователя

Страница: 9 / 68

8
Open the Web-based UI of the Selected camera
1. To access the Web-based user interface of the selected unit by selecting “Open web” from the slide-bar.
2. If the device has been configured correctly, the default Web browser, the Internet Explorer, will open to
the home page of the selected device.
3. If you find your browser is opened and automatically connected to the camera Home Page, it means
you’ve assigned an IP Address to the unit successfully. Now you can close the IP Installer and start to
use your camera.
4. Usually the users no longer need to run the IPInstaller software again after configuring the cameras
correctly.
Verify and Complete the Installation from Your Browser
If not able to get the ActiveX downloaded properly, user must temporarily lower the security settings to
perform a one-time-only installation of the ActiveX component onto the workstation, as described below:
- From the Tools menu, select [Internet Options] -> [Security] -> [Custom Level]
- Set the security level to Low and click [OK].
- Depends on different versions of browser software used, the users may have to set the individual ActiveX
settings from “Disable” to “Prompt” or “Enable” if necessary for completing the ActiveX program
downloads.
- Restore the security level after the ActiveX installation.