Longtime LCH-1215A, Руководство пользователя

Страница: 18 / 27

Section 9: Trouble Shooting
Please see below for trouble shooting:
"E.Q." LED "STATUS" LED Status
Red, flashing Red, constantly lit
Short circuit and low voltage,
shut down
Red, flashing Orange, constantly lit
Battery temperature abnormal,
stop charging
Red, flashing Red, flashing Fan abnormal
Red, flashing Orange, flashing Connected to the remote socket
Red, flashing Green, flashing
Charger overheated (>100°C),
stop charging
Red, flashing Red and green by turns
Charging voltage too high and
shut down
Red, flashing Orange and green by turns
Charging current too high and
shut down
Red, flashing Red and orange by turns
Defective fuse or
reverse ‐ polarity
Red, flashing for 10 seconds Void setting
Table 9 : Abnormal Functional Check
9 ‐ 1 The Battery Voltage would not Increase After Charging
z
If possible, measure with a suitable multi ‐ meter during the charging to verify if the voltage at
the battery terminals increases.
z
Determine whether the terminals are connected properly to the battery poles. Clean the
battery poles if necessary to ensure better connection.
9 ‐ 2 The Battery is not Fully Charged After a Charging Time About 20 Hours
z
Disconnect the power to the charger.
z
Remove the battery from the charging terminals and wait for a few minutes.
9 ‐ 2 ‐ 1 12V Battery
If the multi ‐ meter displays a voltage of 10V or less, this indicates that the battery is defective and
can not be charged any longer.
9 ‐ 2 ‐ 2 24V Battery
If the multi ‐ meter indicates a voltage of 20V or below, allow the battery be checked by a specialist,
if necessary. Otherwise, dispose of the battery
17