8
1.4 The Rear Panel
The following figure shows the rear panel of the switch:
Power Receptacle
To be compatible with the electric service standards around the world, the switch is designed to
afford the power supply in the range from 100 to 240 VAC, 50/60 Hz. Please make sure that your
outlet standard to be within this range.
To power on the switch, please plug the female end of the power cord firmly into the receptacle of
the switch, the other end into an electric service outlet. After the switch powered on, please check if
the power LED is lit for a normal power status.
1.5 Installation
Unpacking Information
The product package should include the following:
z
One 24G/16G+4SFP Gigabit Ethernet Smart Managed Switch
z
One
power
cord
z
Rubber foot and screws
z
Rack-mount
brackets
z
One CD-ROM for user manual
Rack-mount Installation
Rack Mounting the Switch in the 19-inch rack:
z
Disconnect all cables from the switch before continuing.
z
Place the unit the right way up on a hard, flat surface with the front facing toward you.
z
Locate a mounting bracket over the mounting holes on one side of the unit.
z
Insert the screws and fully tighten with a suitable screwdriver.
z
Repeat the two previous steps for the other side of the unit.
z
Insert the unit into the 19" rack and secure with suitable screws (not provided).
z
Reconnect
all
cables.
