42
Field
Description
Port
Specify the interface ID or the list of interface IDs.
State
The operational state on the specified port.
Path Cost
STP path cost on the specified port.
Priority
STP priority on the specified port.
Operation Edge
The operational edge port on the specified port.
Operational
Point-to-Point
The operational edge point-to-point status on the specified port.
Port Role
The current port role on the specified port. The possible values are:
“Disabled”, “Master”, “Root”, “Designated”, “Alternative”, and “Backup”
Port State
The current port state on the specified port. The possible values are:
“Disabled”, “Discarding”, “Learning”, and “Forwarding”.
Designated
Bridge
The bridge ID of the designated bridge.
Designated Port
ID
The designated port ID on the switch.
Designated Cost
The path cost of the designated port on the switch.
STP port setting buttons
Field
Description
Protocol
Migration Check
Restart the Spanning Tree Protocol (STP) migration process (re-negotiate
with its neighborhood) on the specific interface.
Edit STP port setting
Field
Description
State
Enable/Disable the STP on the specified port
Path Cost
Specify the STP path cost on the specified port.
Priority
Specify the STP priority on the specified port.
Edge Port
Specify the edge mode.
Enable
: Force to true state (as link to a host)
Disable
: Force to false state (as link to a bridge)
In the edge mode, the interface would be put into the Forwarding state
immediately upon link up. If the edge mode is enabled for the interface and
there are BPDUs received on the interface, the loop might be occurred in
the short time before the STP state change.
Point-to-Point
Specify the Point-to-Point port configuration:
Auto
: The state is depended on the duplex setting of the port.
Enable
: Force to true state.
Disable
: Force to false state.
