802.11g WLAN/Bluetooth Combo USB Dongle User Manual
20
Chapter 5. How to use the WLAN Utility(Access Point)
5.1 Introduction
To set your 802.11g USB 2.0 WLAN dongle as an Access Point(AP) ,
reference In Access Point mode , your 802.11g USB 2.0 WLAN dongle as an
AP . this allows you to set up your wireless network without using a
dedicate AP device. Up to 16 wireless station can associate to 802.11g USB
2.0 WLAN dongle.
Additional Setup Requirement
To bridge wireless and wired using the 802.11g USB 2.0 WLAN dongle, The
following requirement must be met.
1.
The 802.11g USB 2.0WLAN dongle must be installed a computer connect
to the wired network.
2.
Either configure network sharing or bridge the two interfaces(Wireless &
Wired) on the computer.
3.
Set the wireless station’s IP address to be in the same subnet as the
computer in which 802.11g WLAN dongle is installed.
5.2 The 802.11g WLAN dongle Utility Screen
5.2.1 Select “ACCESS POINT” in the MODE field to display the screen as
shown.
ACCESS POINT Mode
5.2.2 click “More Setting…”in the 802.11g USB 2.0 WLAN dongle screen to
display the screen as shown.
