OPERATION
Starting a cold engine
1.Set the parking brake.
2.Turn the fuel cock to “ON”
3.Turn the engine stop switch to “ON”
4.Press down the start botton to “ON”
5.Shift the transmission gear to neutral.
6.Push the choke lever towards left to the end.
7.Complete close the throttle lever.
8.Push the start switch to crank the engine
9.Push the throttle lever to the middle position
(warming up position.)until the engine runs then
release the start button. If the en gine fails to
start, release
the start button, then push it
again. Each cranking should not be more than
5 seconds,the continuous cranking times
should not be more than 3 times.
10.Keep warming up the engine for 5 min.then
push the choke lever towards right to the
terminal.
WARNING
Indicates a potential hazard that could result in
serious injury or death.
WARNING
POTENTIAL HAZARD
Operating ATV without being familiar with all
controls.
WHAT CAN HAPPEN
Loss of control, which could cause an acci-
dent or injury.
HOW TO AVOID THE HAZARD
Read this manual carefully. If you don’t
understand any control or function, ask your
dealer.
6-1
Содержание LX200AU-2
