User Interface
The user interface, which is located on the front of the machine control panel, enables you
to access all of the features and functionality provided by the X
5c
X-Ray Inspection System.
Through the user interface you can setup and manage all parameters required for inspecting
products and for the general operation of the machine.
The following sections provide more information:
The user interface has been carefully designed to be as intuitive as possible, using common
actions and symbols that you will see and use when operating other equipment and
computers. For further assistance, this section is included to describe how to find your way
around the user interface, highlighting some common functionality that makes things simple
to do.
The user interface provides a hierarchy of screens that are presented in a logical sequence
for setting up the machine for inspecting products and accessing system and inspection
information. Although you will quickly learn how to navigate through the screens to access
the ones you want, this section provides some assistance for you to get started. A full
description for each of the screens is available. Where applicable additional information is
included to explain the principles behind some of the more complex settings available.
General Navigation
The user interface provides a number of screens which are accessed through menu buttons
displaying relevant icons and text. Most screens also contain a series of tabbed panes. In
some cases a tabbed pane may contain a number of sub-tabs to help organise information
and settings into a logical hierarchy.
There are two main screens, the
screen and the
other screens may be accessed.
Screen Access
Access to screens is managed through multiple
, based on user type, and the
system has default screen access configured for each level. For more information on Access
levels see