Installation instruction stove KOMEN Creina d.d.
3.1.6.
Fire-protection distances
Minimum distance between charging door
and combustible objects must be at least
80 cm, while for sideplates; the distance
must be greater then 20 cm.
3.1.7.
Chimney
Effective height of the chimney should be
at least 4 meters (measured from the
hearth of the stove). For detailed
calculations, please refer to standard EN
13384-2.
4. Transport
Transport should be handled by experts with
appropriate equipment.
4.1.
Packaging
o
Stove it tightly fixed onto a palette.
o
Please check the stove for possible
damages and that is contains all
ordered parts.
o
If you do find any damages, please
report them to your stove supplier
immediately.
4.2.
Handling of stove
o
Stoves should be moved with a palette,
standing upside-down. Move it carefully
so it does not tip over!
o
Avoid shocks and vibrations.
o
Once in place, dismount it and proceed
with the installation.
o
When transporting, do not physically
overload the top cover of the stove.
5.
General instructions (Air inlet is
optional)
o
Please do not overload the stove.
o
All the packing material should be removed
from hearth and ash pan.
o
Check out functionality of movable parts
(front door etc.)
o
Build outer air flaps into facade
o
Mount smoke flap onto chimney funnel
o
Connect chimney funnel. Chimney
thickness and insulation must be in
accordance with country's and EU
construction regulations.
o
Chimney must not apply additional
pressure on the stove.
o
Minimum diameter of the chimney should
be taken into consideration.
o
Measured values, gathered in this
document, corresponds to the calculations
of chimney with the following dimensions -
4 m height; diameter 150mm.
5.1. Air supply connection
o
For stove to work properly, continuous
air supply is required.
o
If upper requirement is not met,
additional air supply can be provided
through air tube connection (Ø100mm)
(accessory), which is inserted at the
back of the stove's pedestals onto the
stove.
o
Airflow is being regulated with air taps,
which are built-in, into air supply
conduit. These parts are not supplied
with the stove, nor they are part of the
stove.
o
Please note that during winter times,
cold air surges can generate condense
on stove parts and thus compromise its
functionality. Don't expose stove to
water.
6. Repair advice
o
Glass frame and most of the movable parts
can be removed once the stove is installed.
o
Repairs can only be performed by a
professional in agreement with the
supplier/manufacturer
o
Repair instructions are not part of this
document
o
If necessary, refer to your local dealer of
service agent.
7. General warranty
For details on warranty, please look at the user
manual.
